Oil Cyclinder / Hydraulic Actuator
产品介紹
Oil Cyclinder Dimension
| MOB TYPE | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SIZE | ΦA | ΦB | C | E | F | G | H | N | P | PM | PT | S | T | ZC | ZCB | ΦCD | CR |
| BORE | |||||||||||||||||
| Φ40 | 40 | 20 | M16X91.5 | 28 | 17 | 20 | 30 | 30 | 80 | 3/8 | 50 | 8 | 183 | 12 | 13 | ||
| Φ50 | 45 | 20 | M16X91.5 | 28 | 17 | 20 | 30 | 28 | 79 | 3/8 | 50 | 8 | 181 | 12 | 13 | ||
| CA TYPE | ||||
|---|---|---|---|---|
| SIZE | CL | CM | CN | CV |
| BORE | ||||
| Φ40 | 36 | 11 | 25 | 22 |
| Φ50 | 36 | 12 | 24 | 22 |
Installation
When the materials is released out, the detector is installed at the front of the first wheel outside of ram slide, and it is singly fixed, the fixers before and after the oil cylinder must be close and tight without gap.
During the roll and taking of the material and the right and left movements of ram slide, the material at the fixed wheel would do its best to follow the right and left movements of the ram slide. Therefore the material at the fixed wheel increases its friction surface or the press wheel is used. the position of the detector installed is on the surface of the ram slide. When the oil cylinder is installed, the connectors must be tight and closely secured without and gap.